DESIGNED MONOMERS AND POLYMERS

Designed Monomers and Polymers ( DMP) publishes prompt peer-reviewed papers and short topical reviews on all areas of macromolecular design and applications. Emphasis is placed on the preparations of new monomers, including characterization and applications. Experiments should be presented in sufficient detail (including specific observations, precautionary notes, use of new materials, techniques, and their possible problems) that they could be reproduced by any researcher wishing to repeat the work.The journal also includes macromolecular design of polymeric materials (such as polymeric biomaterials, biomedical polymers, etc.) with medical applications.DMP provides an interface between organic and polymer chemistries and aims to bridge the gap between monomer synthesis and the design of new polymers. Submssions are invited in the areas including, but not limited to:macromolecular science, initiators, macroinitiators for macromolecular designkinetics, mechanism and modelling aspects of polymerizationnew methods of synthesis of known monomersnew monomers (must show evidence for polymerization, e.g. polycondensation, sequential combination, oxidative coupling, radiation, plasma polymerization)functional prepolymers of various architectures such as hyperbranched polymers, telechelic polymers, macromonomers, or dendrimersnew polymeric materials with biomedical applications Even though monomers are the building blocks of polymers, there is no polymer journal that covers monomers as a specialized subject, and articles on monomers have been scattered over a vast number of journals. Designed Monomers and Polymers seeks to redress the balance by providing an international forum for the publication of research into monomers and the art and science of macromolecular design.Designed Monomers and Polymers is now a fully open access journal. This means all accepted articles are available for anyone to read anythere, at any time immediately on publication. All submitted papers continue to be peer reviewed following the current rigorous process.There is no charge on submission. Authors of accepted papers will pay an article publishing charge (APC) of ?875 / $1135/ ?1005 following peer review. We have agreed a discount on this APC for authors in some institutions. See our list of open access members for more details.

DESIGNED MONOMERS AND POLYMERS期刊中文简介

设计单体和聚合物（DMP）发表了迅速的同行评审论文，并对大分子设计和应用的所有领域进行了简短的专题评论。重点是新单体的制备，包括表征和应用。实验应足够详细（包括具体观察结果、注意事项、新材料的使用、技术及其可能存在的问题），任何希望重复这项工作的研究人员都可以复制这些实验。该杂志还包括高分子聚合物材料（如高分子生物材料，生物医学聚合物等）的高分子设计与医学应用。DMP提供了有机化学和聚合物化学之间的界面，旨在弥合单体合成和新聚合物设计之间的鸿沟。包括但不限于：高分子科学、引发剂、高分子设计用大引发剂聚合动力学、机理和建模方面合成已知单体的新方法新单体（必须显示聚合的证据，例如缩聚、顺序组合、氧化耦合、辐射、等离子聚合）各种结构的功能性预聚物，如超支化聚合物、遥爪聚合物、大单体或树枝状聚合物。生物医学应用的新型高分子材料虽然单体是聚合物的基石，但目前还没有一个专门的学科涵盖单体的聚合物杂志，关于单体的文章已经散布在大量的期刊上。设计的单体和聚合物旨在通过提供一个国际论坛，以出版单体研究和高分子设计的艺术和科学来弥补这一平衡。设计的单体和聚合物现在是一个完全开放的访问期刊。这意味着所有被接受的文章在任何时候都可以供任何人在出版后立即阅读。按照目前严格的流程，所有提交的论文将继续接受同行评审。提交时不收费。接受论文的作者将在同行评审后支付875英镑/1135美元/1005欧元的文章出版费。我们已经同意在这个APC上为一些机构的作者提供折扣。有关详细信息，请参阅我们的开放访问成员列表。

中科院SCI期刊分区：DESIGNED MONOMERS AND POLYMERS分区

大类学科

小类学科

Top期刊

综述期刊

化学 4区

POLYMER SCIENCE
高分子科学

3区

否