JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

The Journal of Materials Processing Technology covers the processing techniques used in manufacturing components from metals and other materials. The journal aims to publish full research papers of original, significant and rigorous work and so to contribute to increased production efficiency and improved component performance.Areas of interest to the journal include:? Casting, forming and machining? Additive processing and joining technologies? The evolution of material properties under the specific conditions met in manufacturing processes? Surface engineering when it relates specifically to a manufacturing process? Design and behavior of equipment and toolsThe core interest of the journal is the processing of metals, but we also cover other materials, where the article is focused on the influence of the process on the materials, and where there are not other more appropriate dedicated journals. For example ductile forming of polymers if of interest, but the influence of polymer composition on properties is well covered in dedicated polymer journals.A typical article will examine the influence of process design, tool design, or process operating conditions on the properties of the material or the future performance of the equipment. Most articles combine appropriate quantitative analysis with well designed experiments. The sciences of materials, tribology and thermodynamics are well covered in other dedicated journals, so these topics are of interest to this journal only when applied specifically to give insight into the processing techniques used in manufacturing components. For example, processes for engineering surfaces are of interest, but the analysis of friction is well covered by specialised journals of wear or tribology.The journal's Editorial Policy defines our basis for considering submissions. Typical published articles will contribute significant new transferable knowledge in the form of (a) an innovation or (b) a new insight into material processing in the form of a transferable qualitative or quantitative explanation of a difference between experimental measurements and the predictions of existing theory. 'Transferable' knowledge applies to materials or processing conditions broader than those tested within the article.The Journal of Materials Processing Technology generally does not accept papers in the following areas:? Simulation with no experimental verification and/or which gives no new insight into the process? Experimental reports which do not provide a convincing analytical or physical explanation of observed behaviour? Topics that properly belong to the materials science literature. Examples include the synthesis of materials, chemical experiments and studies of material composition.? The analysis of material properties, surfaces or product performance without reference to the processing which caused them.? Statistical methods or techniques from Artificial Intelligence which treat the process as a black box.? The operation of equipment, without reference to materials (such as tool path design in CNC machining), or the management of factory systems.As stated in the journal's editorial policy, the Journal of Materials Processing Technology does not accept multiple-part papers, short communications or case studies.Papers submitted to the journal will only be considered if they have been prepared according to the journal's Guide for Authors.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY期刊中文简介

《材料加工技术杂志》涵盖了金属和其他材料制造零部件所采用的加工技术。该杂志的目的是发表完整的研究论文原创性，重大和严谨的工作，从而有助于提高生产效率和提高组件性能。期刊感兴趣的领域包括：?铸造、成型和机加工?添加剂加工和连接技术?在制造过程中满足的特定条件下材料性能的演变?表面工程，特别涉及制造工艺?设备和工具的设计和行为该期刊的核心兴趣是金属加工，但我们也涵盖了其他材料，其中文章重点介绍了工艺对材料的影响，以及没有其他更合适的专用期刊的情况。例如，如果感兴趣的话，聚合物的塑性成形，但是聚合物成分对性能的影响在专门的聚合物杂志上有很好的报道。典型文章将研究工艺设计、工具设计或工艺操作条件对材料性能或设备未来性能的影响。大多数文章将适当的定量分析与精心设计的实验相结合。材料科学、摩擦学和热力学在其他专门的期刊上都有很好的介绍，因此这些主题只有在专门用于深入了解制造组件中使用的加工技术时才对本期刊感兴趣。例如，工程表面的工艺是有意义的，但是摩擦分析被专门的磨损或摩擦学杂志所覆盖。期刊的编辑政策规定了我们考虑提交材料的依据。典型的已发表文章将以（a）创新或（b）以可转让的定性或定量解释实验测量和现有理论预测之间差异的形式，对材料加工提供重要的新的可转让知识。可转让的“知识”适用于比物品中测试范围更广的材料或加工条件。《材料加工技术杂志》一般不接受以下领域的论文：?无实验验证的模拟和/或对过程没有新见解的模拟?对观察到的行为不能提供令人信服的分析或物理解释的实验报告?适当属于材料科学文献的主题。实例包括材料的合成、化学实验和材料组成的研究。?分析材料特性、表面或产品性能，而不参考导致这些特性的加工。?人工智能的统计方法或技术，将过程视为黑盒。?在不参考材料（如CNC加工中的刀具路径设计）或工厂系统管理的情况下操作设备。正如期刊的编辑政策所述，《材料加工技术杂志》不接受多篇论文、简短的交流或案例研究。提交给期刊的论文只有在根据期刊的作者指南进行准备的情况下才会被考虑。